Independent est. 2005     Record shop & custom deck/refurbishment specialist     Hereford's leading supplier of audio & technical equipment

 
 

Void Air Array

£15,399.00

 

Qty

Like us on...

Air Array

Three-way bi-amped sculpted 
loudspeaker array

Key Features

  • Visually striking appearance for style-led environments
  • Fibreglass composite construction
  • 14 discrete proprietary drive units
  • Integrated flying and mounting system
  • Ground stack on subwoofers
  • Optional floor stand or flying bracket
  • Standard red finish, optional custom colours

 

Overview

The Air Array is the mid-high element of the Incubus system with radical looks that are not just for show. Its shape is specifically designed to fuse each section together, forming a coherent radiation pattern over its stated dispersion angles. Line source behavioural conditions allow both frequency and power shading to be used within a single enclosure so the sound pressure level in the near field is attenuated and matched with that at greater distances, while HF absorption is corrected with linear frequency shading. By employing a line source configuration, this is the only mid-high enclosure that can provide constant SPL at all distances with all frequencies arriving at the same time, wherever you are within its coverage.

The low-mid section consists of two hyperbolic horns fed from a split manifold, driven by four very high power 12” transducers – each featuring a heatsink cooling system to reinforce reliability and reduce power compression levels, for exceptional output with the highest definition. Four newly developed 3” exit compression drivers handle the mid-range frequencies, each driven by a 6” diaphragm to comfortably reproduce frequencies down to 500 Hz. Path length compensation devices are applied to the waveguides to seamlessly combine their outputs, eliminating all destructive interference and ensuring constant output within the stated coverage angles. The high frequency section uses six compression drivers with 1” throat waveguides, positioned on a physical arc to create a virtual common feed point.

This configuration reduces all forms of destructive interference, maintaining an even frequency response within every degree of the stated coverage angles. Path length compensation devices housed within the waveguides marry with the extended upper response of the compression drivers, allowing the HF to extend up to 26 kHz.

The Air Array can either be stack-mounted using a custom steel box frame stand, or flown with the proprietary load tested flying system. The Void visual signature is evident via the standard gloss red finish and weight-saving fibreglass composite structure.

 

Specifications

Frequency Response90 Hz - 26 kHz ±3 dB
EfficiencyLF: 111 dB 1w/1m, MF: 114 dB 1w/1m, HF: 116 dB 1w/1m
Crossover PointPreset via dedicated processor
ImpedanceLF: 2 x 4 ohms, MF: 2 x 4 ohms, HF: 2 x 5.33 ohms
Power HandlingLF: 3600 Watts AES, MF: 800 Watts AES, HF: 320 Watts AES
Maximum Output143 dB cont, 146 dB peak
Driver Configuration4 x 12" LF, 4 x 3" MF compression driver, 6 x 1" HF compression driver
Dispersion90°H x 45°V
Connectors2 x 8-pole speakON™ NL8
Height1240 mm (48.8")
Width944 mm (37.2")
Depth813 mm (32")
Weight144.8 kg (319 lbs) including stand
EnclosureFibreglass composite
RiggingStack mounted or proprietary flying system
FinishSmooth cellulose